PIANETA Brass Globe Chandelier · Data Sheet

In the print window, choose “Save as PDF” to download a copy.

www.rayoralight.com
support@rayoralight.com

Product data sheet · Chandeliers

PIANETA Brass Globe Chandelier

Brass chandelier with curved arms and frosted white or clear glass globes. 3 to 10 lights, Ø 55–100 × H 30 cm.

PIANETA

At a glance as supplied

Sizes 3 lights Ø 55, 5 lights Ø 65, 8 lights Ø 85, 10 lights Ø 100 cm. All H 30 cm.
Materials Metal frame, glass globes.
Finish Brass, with frosted white or clear glass.
Hanging Rods of 30 cm and 20 cm, use one or join to 50 cm.
Bulb G9, one per globe. Not included.
Voltage AC 110–240V.
Dimming Works with a compatible dimmer and dimmable G9 bulbs.
Installation Hardwired. Flat ceilings only.
Use Indoor, dry areas. IP20.
RAYORA LIGHT · www.rayoralight.com · support@rayoralight.comPage 1 of 2
www.rayoralight.com
support@rayoralight.com

PIANETA · Size & planning

Dimension drawing illustrative

Ø 55–100 cmH 30 cmSide · illustrative

Which size is right?

Size Room Best for
3 Lights · Ø 55 cm 6–10 m² · 65–110 sq ft Small dining tables, bedrooms, entries
5 Lights · Ø 65 cm 10–16 m² · 110–170 sq ft Dining tables of about 120–160 cm
8 Lights · Ø 85 cm 16–25 m² · 170–270 sq ft Living rooms, large dining tables
10 Lights · Ø 100 cm 25 m²+ · 270 sq ft+ Open-plan rooms, high ceilings

Planning

  • Over the table: Hang the globes 75–90 cm above the table top. Choose a width about half to two thirds of the table length.
  • Room centre: Add the room length and width in metres and multiply by 8 for a good width in cm. A 4 × 4 m room gives about 64 cm.
  • Ceiling height: The rods give drops of 20, 30 or 50 cm. Keep 2.1 m of headroom in walkways.

Installation & care

  • Hardwired, no plug. A qualified electrician is recommended.
  • Takes G9 bulbs, one per globe. Bulbs not included.
  • Rods of 30 cm and 20 cm, use one or join to 50 cm.
  • Dimmable with a compatible dimmer and dimmable G9 bulbs.
  • AC 110–240V. Flat ceilings only. Indoor, dry areas only (IP20).
  • Wipe the brass with a soft, dry cloth.

Specifications are as supplied by the manufacturer and may vary slightly. For questions, contact support@rayoralight.com.

RAYORA LIGHT · www.rayoralight.com · support@rayoralight.comPage 2 of 2